Novastar CVT Series Fiber Converter

Novastar CVT310/CVT320 Fiber Converter

Novastar CVT310 fiber converter is the converter between ethernet cable and multi-mode optic fiber cable for Novastar M3 led system.

1. Novastar CVT310/CVT320 Fiber Converter Introduction:

1). If you have a large distance between your NovaStar controller and your LED display, the CVT310 fiber optic converter is the right solution.

2). Novastar CVT310 can be used either as a transmitter or receiver unit. Thanks to the LC interface, the device can be connected very easily to a fiber optic source.

3). To transmit the signal from a controller to an LED Display two units are always needed (Transmitter (TX) and Receiver (RX)).

2. Novastar CVT310/CVT320 Fiber Converter Features:

1). 1 cable interface, 1 fiber interface;

2). 100~240V AC 50/60HZ power supply;

3). Use multi-mode dual-core optical fiber with LC interface, the transmission distance is 300M;

4). No driver required, immediately use after connection.

3. Novastar CVT310/CVT320 Fiber Converter Specifications:

Note: Novastar CVT310/CVT320 is Nova EO converter device; two units are always required!!

1). 1 optic fiber interface

2). 1x RJ45 Ethernet port for data input

3). Power supply: 100~240V AC 50/60Hz

4). DC output: 5V, 5A

5). No need to install the drivers

6). Operating temperature: -20°C ~ 70°C

7). Operating humidity: 10 ~ 90%

8). CVT310: Transmission distance up to 300m, by using multi-mode dual-core optic fiber with LC interface

9). CVT320: Transmission distance up to 15km, by using signle-mode dual-core optic fiber with LC interface

10). Certification: CE, RoHS, FCC, EAC.

Novastar CVT10(S/M) Fiber Converter

1. Novastar CVT10 Fiber Converter Introduction:

1). Novastar CVT10 fiber converter offers a cost-effective way to convert optical signals to electrical signals, or electrical signals to optical signals, for connecting the sending card to the led display.

2). Delivering a full-duplex, efficient and stable data transmission that is not easily interfered with, this converter is ideal for long-distance transmission.

3.) The CVT10 hardware design focuses on the practicality and convenience of the on-site installation.

4). It can be mounted horizontally, in a suspended way, or rack mounted, which is easy, secure and reliable.

5). For rack mounting, two CVT10 devices, or one CVT10 device and a connecting piece can be combined into one assembly that is 1U in width.

2. CVT10 Fiber Converter Features:

1). Models include the CVT10-S (single-mode) and the CVT10-M (multi-mode).

2). Have 2x optical ports with hot-swappable optical modules installed at the factory, bandwidth of each up to 10 Gbit/s

3). Have 10x Gigabit Ethernet ports, bandwidth of each up to 1 Gbit/s

a. Fiber in and Ethernet out: 8x Ethernet ports available (ports 1–8), ports 9–10 currently unavailable (to beavailable in the future upgrade)
b. Ethernet in and fiber out: 10x Ethernet ports available

4). Have 2 types of power connectors, including a 3-pin power socket and a PowerCON socket

5). Have 1x type-B USB control port

3. CVT10 Fiber Converter Specifications:

4. Novastar CVT10 Fiber Converter Applications:

The Novastar CVT10 fiber converter is used for long-distance data transmission.
Users can decide a connection method based on whether the sending card has optical ports.